Converted LDPE formats
Shrink Film Formats for Industrial Packing
Select the LDPE heat-shrink format around the way goods enter the packing process. Shrink film sleeves, bags, sheets, tape, half-sleeves and hoods are available from a 30 μm minimum thickness and 200 mm minimum width.
- Made in the EU
- Private-label trial orders from one EUR pallet
- Up to three or four specifications on one pallet
Applications
Select by packing method
The film format determines how operators or equipment place the material around a product or load before shrinking.
Sleeves and half-sleeves
Use a continuous sleeve-based format where the established packing process feeds and closes film around the goods.
Shrink film bags
Choose a preformed bag where goods are inserted into a defined finished format before sealing and shrinking.
Shrink film sheets and tape
Specify a flat format where the packing method starts from sheeted or continuous flat material.
Shrink film hoods
Use a hood format for compatible load-covering operations, including a pallet shrink hood requirement.
Technical range
Available specifications
Use the values below as the starting point for a quotation. Include roll length or weight and expected quantity in the request.
| Flat formats | Tape and sheets |
|---|---|
| Sleeve formats | Sleeves and half-sleeves |
| Preformed formats | Hoods and bags |
| Minimum thickness | 30 μm |
| Minimum width | 200 mm |
| Colours | Clear, black, white and blue |
Specifications outside the published range are not implied. Submit the full requirement for review.
Customization
Quote finished dimensions, not only the format name
State the format, all required finished dimensions, thickness, colour, packed-product or load dimensions, packing method and estimated quantity. These details define a usable converted-film enquiry.
Private label
Customer presentation where required
Add customer-brand label and carton needs to the specification when private-label supply is required. Neutral shipping directly to the end customer is available.
Buyer guidance
How to narrow the format choice
Begin with the existing packing operation: how the film is opened or fed, where seals are made and how the goods are supported. The resulting drawing or dimensional brief should identify every finished dimension needed for sleeves, bags or hoods.
No heat-setting, machinery or process-performance assumption is made from the format name alone; those operating details remain part of the buyer’s specification.
Buyer FAQs
Frequently asked questions
Which shrink film formats are available?
Tape, sleeves, half-sleeves, hoods, bags and sheets are available.
Can you supply a pallet shrink hood?
Hoods are an available LDPE heat-shrink format. Provide the finished dimensions, thickness, colour and application for quotation.
What dimensions should a shrink-film enquiry include?
Provide all finished dimensions for the selected format, with thickness, colour and the dimensions of the product or load being packed.
What are the minimum film dimensions?
The minimum thickness is 30 μm and the minimum width is 200 mm.
Specify your shrink-film format
Send a dimensional brief with format, thickness, colour, application and estimated quantity.