Heat-shrink packaging film
LDPE Shrink Film
LDPE shrink film is supplied for industrial heat-shrink packaging in a range of converted formats. Also described as polyethylene shrink film or polythene shrink film, it can be specified from the stated minimum thickness and width in clear, black, white or blue.
- Made in the EU
- Private-label trial orders from one EUR pallet
- Up to three or four specifications on one pallet
Applications
Industrial shrink-film uses
The correct converted format depends on how the buyer loads, seals and shrinks the film around the goods.
Product grouping
Specify a film format for grouping compatible industrial goods during handling and distribution.
Pallet and load covering
Use hoods or related formats where the packing operation applies heat-shrink film over a load.
Converted packaging
Choose bags, sheets, sleeves or half-sleeves to suit the established packing method.
Technical range
Available specifications
Use the values below as the starting point for a quotation. Include roll length or weight and expected quantity in the request.
| Minimum thickness | 30 μm |
|---|---|
| Minimum width | 200 mm |
| Colours | Clear, black, white and blue |
| Formats | Tape, sleeves, half-sleeves, hoods, bags and sheets |
Specifications outside the published range are not implied. Submit the full requirement for review.
Customization
Define the converted shrink-film format
Provide the required format, finished dimensions, thickness at or above 30 μm, width at or above 200 mm, colour, packing application and estimated volume. The industrial shrink film quotation is prepared from that customer specification.
Private label
Presentation and fulfilment
Where customer branding is required, include label and carton requirements in the enquiry. Private-label production can be supplied under the supplier brand or the customer’s brand, and neutral shipping directly to the end customer is available.
Buyer guidance
LDPE describes the material; format describes the supply
A useful enquiry includes both. “LDPE shrink film” identifies the material family, while tape, sleeve, half-sleeve, hood, bag or sheet identifies how it should be supplied for the customer’s packaging process.
Buyer FAQs
Frequently asked questions
What is the minimum LDPE shrink film thickness?
The minimum thickness is 30 μm.
What is the minimum width?
The minimum width is 200 mm.
Which colours are available?
LDPE heat-shrink film is available in clear, black, white and blue.
Which supply formats are available?
Available formats are tape, sleeves, half-sleeves, hoods, bags and sheets.
Request an LDPE shrink film quotation
Send the format, dimensions, thickness, colour, packing application and estimated order quantity.